Spoolwise

Parts we actually use

A short list, deliberately. Six things that fail on these printers, rather than three hundred we have not touched.

Textured PEI Build Plate, 257 × 257 mm Textured PEI Build Plate, 257 × 257 mm
$26.99

The plate is the cheap answer to “it stopped sticking” — and the one people replace last.

Hardened Steel Nozzle Trio — 0.4 / 0.6 / 0.8 mm Hardened Steel Nozzle Trio — 0.4 / 0.6 / 0.8 mm
$34.99

Brass wears out in a couple hundred grams of carbon fibre. Buy three sizes once instead of one nozzle five times.

Air Assist Pump, 30 L/min Air Assist Pump, 30 L/min
$62.99

The cheapest upgrade that changes the cut, not the machine.

Filament Dry Box Filament Dry Box
$34.99

Most “bad retraction” is moisture. This keeps a spool printable for months instead of days.

Dual Z Axis Kit for Ender 3 / Pro / V2 Dual Z Axis Kit for Ender 3 / Pro / V2
$64.99

Only buy this if your banding changes from one side of the bed to the other. If it repeats at 8 mm, the fix is a coupler, not this kit.

Complete Hotend Kit — Bambu Lab A1 / A1 mini Complete Hotend Kit — Bambu Lab A1 / A1 mini
$36.99

The whole assembly, not just the nozzle. When a clog keeps coming back, the part that is worn is usually not the tip.

Bambu Lab Starter Kit — plate + nozzle
$59.99

Two parts that fix most first-layer and wear problems, together.

Get the guide before you buy

One email per guide. No product pitches — several of them argue against the upgrade.