


Brass wears out in a couple hundred grams of carbon fibre. Buy three sizes once instead of one nozzle five times.
$34.99
Secure checkout by PayPal. Card or PayPal balance. Dispatched within 7 business days.
| Fits | Bambu Lab P1P, P1S, X1, X1C (P/X hotend) |
|---|---|
| Sizes | 0.4 / 0.6 / 0.8 mm |
| Material | Hardened steel |
| Weight | 120 g |
The P/X hotend and the A1 hotend are different parts — these fit P/X only.
Dispatched from our own warehouse in China within 7 business days, then 8–14 business days in transit to the US with tracking. 30-day refund, no return required.
Run 5–10 °C hotter than your brass profile. That is the whole adjustment.
Fewer layer interfaces per part, which is often a better fix for weak parts than any slicer setting.
Not inherently. Lower thermal conductivity means the melt is slightly cooler at the tip if you do not raise the temperature.
← all parts · compatibility table
Not sure you need this? Hardened steel vs brass: when the upgrade pays first.
One email per guide. No product pitches — several of them argue against the upgrade.