



The whole assembly, not just the nozzle. When a clog keeps coming back, the part that is worn is usually not the tip.
$36.99
Secure checkout by PayPal. Card or PayPal balance. Dispatched within 7 business days.
| Fits | Bambu Lab A1, A1 mini |
|---|---|
| Nozzle | 0.4 mm hardened steel |
| Assembly height | 49 mm |
| Heat sink | 16.5 mm wide, 21 mm deep |
A1 hotend is a different part from the P/X hotend. This one does not fit P1P, P1S, X1 or X1C.
Dispatched from our own warehouse in China within 7 business days, then 8–14 business days in transit to the US with tracking. 30-day refund, no return required.
Run the automatic flow calibration once. Physical offsets are fixed by the assembly.
Only if the clog is in the melt zone. If it returns every print, dry the filament and check the extruder gear first.
Not without swapping the whole assembly for the 0.6 mm variant.
← all parts · compatibility table
Not sure you need this? Heat creep: the clog that keeps coming back first.
One email per guide. No product pitches — several of them argue against the upgrade.