<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0"><channel>
  <title>Spoolwise — 3D Printer Guides</title>
  <link>https://getspoolwise.com/</link>
  <description>Troubleshooting guides for Bambu Lab and Ender 3 owners.</description>
  <language>en-us</language>
  <item>
    <title>First Layer Not Sticking? 4 Causes, Ranked by Odds</title>
    <link>https://getspoolwise.com/first-layer-not-sticking/</link>
    <guid>https://getspoolwise.com/first-layer-not-sticking/</guid>
    <description>Four causes explain almost every first-layer failure, and they&#x27;re not equally likely. Ranked by how often each one is the real problem, with a 5-minute test.</description>
    <pubDate>Wed, 09 Dec 2026 00:00:00 +0000</pubDate>
  </item>
  <item>
    <title>Bambu Lab Nozzle Clog: Check These 5 Causes in Order</title>
    <link>https://getspoolwise.com/bambu-lab-nozzle-clog/</link>
    <guid>https://getspoolwise.com/bambu-lab-nozzle-clog/</guid>
    <description>Most Bambu Lab clogs aren&#x27;t clogs — they&#x27;re heat creep or worn steel. The five causes in the order you should check them, with how long each step takes.</description>
    <pubDate>Wed, 02 Dec 2026 00:00:00 +0000</pubDate>
  </item>
  <item>
    <title>Ender 3 Z-Banding: Diagnose Before You Buy a Dual Z Kit</title>
    <link>https://getspoolwise.com/ender-3-z-banding-fix/</link>
    <guid>https://getspoolwise.com/ender-3-z-banding-fix/</guid>
    <description>Horizontal lines on an Ender 3 print aren&#x27;t always Z-banding. A print-and-measure test that separates banding, wobble and extrusion issues — before you spend money.</description>
    <pubDate>Wed, 25 Nov 2026 00:00:00 +0000</pubDate>
  </item>
  <item>
    <title>How to Clean a Textured PEI Plate (4-Minute Method)</title>
    <link>https://getspoolwise.com/how-to-clean-textured-pei-plate/</link>
    <guid>https://getspoolwise.com/how-to-clean-textured-pei-plate/</guid>
    <description>Most textured PEI plates aren&#x27;t worn out — they&#x27;re greasy. The 4-minute dish soap method, the water-beading test, and four things that quietly destroy the coating.</description>
    <pubDate>Fri, 20 Nov 2026 00:00:00 +0000</pubDate>
  </item>
  <item>
    <title>Hardened Steel vs Brass Nozzle: When the Upgrade Pays</title>
    <link>https://getspoolwise.com/hardened-steel-vs-brass-nozzle/</link>
    <guid>https://getspoolwise.com/hardened-steel-vs-brass-nozzle/</guid>
    <description>Brass wears out in under 200 g of carbon fiber. Here&#x27;s how to tell whether a hardened steel nozzle actually pays for itself — and when brass is still the right call.</description>
    <pubDate>Wed, 18 Nov 2026 00:00:00 +0000</pubDate>
  </item>
  <item>
    <title>Layer Shifts: What Actually Causes Them, in Order</title>
    <link>https://getspoolwise.com/layer-shifts-causes/</link>
    <guid>https://getspoolwise.com/layer-shifts-causes/</guid>
    <description>A layer shift is a mechanical problem nine times out of ten. Check belts, pulley screws, acceleration limits and heat in this order first.</description>
    <pubDate>Tue, 17 Nov 2026 00:00:00 +0000</pubDate>
  </item>
  <item>
    <title>Warping: Why Corners Lift, and What Stops It</title>
    <link>https://getspoolwise.com/warping-corners-lift/</link>
    <guid>https://getspoolwise.com/warping-corners-lift/</guid>
    <description>Warping is shrinkage stress meeting weak adhesion. The fix is usually temperature control and geometry, not more glue or a hotter bed.</description>
    <pubDate>Mon, 16 Nov 2026 00:00:00 +0000</pubDate>
  </item>
  <item>
    <title>Heat Creep: The Clog That Keeps Coming Back</title>
    <link>https://getspoolwise.com/heat-creep/</link>
    <guid>https://getspoolwise.com/heat-creep/</guid>
    <description>If the same nozzle clogs again after a purge, it is probably heat creep, not debris. Here is how to tell, and the three settings that fix it.</description>
    <pubDate>Mon, 16 Nov 2026 00:00:00 +0000</pubDate>
  </item>
  <item>
    <title>Nozzle Size: What Actually Changes When You Size Up</title>
    <link>https://getspoolwise.com/nozzle-size-tradeoffs/</link>
    <guid>https://getspoolwise.com/nozzle-size-tradeoffs/</guid>
    <description>Bigger nozzles print faster and stronger parts, and cost you detail. Here is what changes with 0.6 and 0.8, and when the swap is worth it.</description>
    <pubDate>Mon, 16 Nov 2026 00:00:00 +0000</pubDate>
  </item>
  <item>
    <title>PETG First Layer: Three Things That Matter</title>
    <link>https://getspoolwise.com/petg-first-layer/</link>
    <guid>https://getspoolwise.com/petg-first-layer/</guid>
    <description>PETG sticks too well or not at all, and the usual PLA advice makes it worse. Squish, plate choice and nozzle height are what actually matter.</description>
    <pubDate>Mon, 16 Nov 2026 00:00:00 +0000</pubDate>
  </item>
  <item>
    <title>How to Dry Filament, and When It Won&#x27;t Help</title>
    <link>https://getspoolwise.com/drying-filament/</link>
    <guid>https://getspoolwise.com/drying-filament/</guid>
    <description>Wet filament explains popping, rough walls and sudden stringing. Here is how to dry a spool properly, how long it takes, and when moisture is not the problem.</description>
    <pubDate>Mon, 16 Nov 2026 00:00:00 +0000</pubDate>
  </item>
  <item>
    <title>Air Assist: What It Changes, and When It Doesn&#x27;t</title>
    <link>https://getspoolwise.com/air-assist-what-it-changes/</link>
    <guid>https://getspoolwise.com/air-assist-what-it-changes/</guid>
    <description>Air assist is the cheapest laser upgrade that changes cut quality. Here is what it actually does, where it stops helping, and how much airflow you need.</description>
    <pubDate>Mon, 16 Nov 2026 00:00:00 +0000</pubDate>
  </item>
  <item>
    <title>Stringing: The Settings That Actually Matter</title>
    <link>https://getspoolwise.com/stringing-settings-that-matter/</link>
    <guid>https://getspoolwise.com/stringing-settings-that-matter/</guid>
    <description>Stringing is usually one of four things. Check temperature, retraction length, travel speed and filament moisture — in that order, before touching anything else.</description>
    <pubDate>Mon, 16 Nov 2026 00:00:00 +0000</pubDate>
  </item>
  <item>
    <title>Printing Carbon Fibre: What Actually Wears Out First</title>
    <link>https://getspoolwise.com/carbon-fiber-what-wears-out/</link>
    <guid>https://getspoolwise.com/carbon-fiber-what-wears-out/</guid>
    <description>Carbon fibre filament rarely fails because of the filament. The nozzle bore, flow profile and layer adhesion fail in a predictable order — here is the order to check them.</description>
    <pubDate>Mon, 16 Nov 2026 00:00:00 +0000</pubDate>
  </item>
</channel></rss>
